R&S®RTH1002 R&S®RTH1004 Scope Rider Specifications RTH_dat-sw_en_3607-0517-22_v0800_Cover.indd 1 Data Sheet | 08.00 Test & Measurement year 01.03.
Version 08.00, March 2016 CONTENTS Definitions ....................................................................................................................................................................... 3 Base unit .......................................................................................................................................................................... 4 Vertical system ...............................................................................................
Version 08.00, March 2016 Definitions General Product data applies under the following conditions: • • • • Three hours storage at ambient temperature followed by 30 minutes warm-up operation Specified environmental conditions met Recommended calibration interval adhered to All internal automatic adjustments performed, if applicable Specifications with limits Represent warranted product performance by means of a range of values for the specified parameter.
Version 08.
Version 08.00, March 2016 DC measurement accuracy Channel-to-channel isolation (each channel at same input sensitivity) after adequate suppression of measurement noise by using highresolution sampling mode or waveform averaging or a combination of both input frequency < analog bandwidth ±( DC gain accuracy × |reading – net offset| + offset accuracy ) > 40 dB (meas.
Version 08.
Version 08.
Version 08.
Version 08.
Version 08.
Version 08.00, March 2016 General data Display Type Resolution Temperature Temperature loading 7.
Version 08.00, March 2016 Safety in line with IEC/EN/DIN EN 61010-1, IEC/EN/DIN EN 61010-2-030, UL/CSA 61010-1, UL/CSA 61010-2-030, IEC/EN/DIN EN 61010-2-033 (R&S®RTH1002), UL/CSA 61010-2-033 (R&S®RTH1002) Battery/power supply Battery data operating time charging time Power adapter capacity voltage input output Lithium-ion rechargeable smart battery approx. 4 h approx. 4 h while instrument is switched off 72 Wh 11.25 V 100 V to 240 V at 50 Hz to 60 Hz, 1.5 A +15 V DC, 4.
Version 08.
Version 08.00, March 2016 Options R&S®RTH-B1 Mixed signal option, additional 8 logic channels Vertical system Input channels Input impedance Maximum input frequency Maximum input voltage Minimum input voltage swing Threshold groups Threshold level signal with minimum input voltage swing and hysteresis setting: normal range predefined Threshold accuracy Comparator hysteresis 8 logic channels (from D0 to D7) 100 kΩ ± 2 % || ~4 pF (meas.) at probe tips 250 MHz (meas.
Version 08.00, March 2016 Serial pattern Timeout Interval Protocol triggers on serial data pattern up to 32 bit clocked by one input channel; pattern bits may be high (H), low (L) or don’t care (X); clock edge slope may be positive, negative or either (requires R&S®RTH-K19 option) max.
Version 08.
Version 08.00, March 2016 R&S®RTH-K2 UART/RS-232/RS-422/RS-485 serial triggering and decoding Protocol configuration bit rate signal polarity number of bits bit order parity stop bits end of packet auto threshold setup Trigger source trigger event setup data setup Decode source display type color coding data format 300 bps to 20 Mbps idle low, idle high 5 bit to 9 bit LSB first, MSB first odd, even, none 1, 1.
Version 08.00, March 2016 R&S®RTH-K200 Wireless LAN Interface wireless LAN 802.11 b/g/n 2x2, 2.
Version 08.00, March 2016 Ordering information Designation Type Order No. Base unit (including standard accessories: one 500 MHz, 10:1, 600 V CAT IV voltage probe for each oscilloscope input channel; one 600 V CAT IV test lead per meter input; compact manual; Lithium-Ion battery pack; power supply with plugs for EU, CH, UK, US, CAN, China, Australia) Handheld Digital Oscilloscope, 60 MHz, 2 channels, DMM R&S®RTH1002 1317.5000K02 Handheld Digital Oscilloscope, 60 MHz, 4 channels R&S®RTH1004 1317.
Version 08.00, March 2016 Designation Accessories Soft Carrying Bag Ethernet Cable, length: 2 m, crossover USB Cable, length: 1.8 m, standard/mini USB connector Hard Shell Protective Carrying Case Car Adapter Battery Charger for Lithium-Ion Battery Replacement Battery Spare Power Supply, for R&S®RTH incl.
Version 08.
Version 08.
Version 08.
Service that adds value Worldwide Local and personalized ❙ Customized and flexible ❙ Uncompromising quality ❙ Long-term dependability ❙ ❙ About Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation.
