User manual

Operating the Instrument
R&S
®
Scope Rider RTH
31Getting Started 1326.1561.02 ─ 0301
2. Turn the wheel until the required value is shown.
3. Press BACK.
Figure 4-6: Set numerical value using the wheel
Data entry using wheel and keypad
You can enter enter precise numerical values on the keypad. See also Figure 4-7.
1.
Set the focus to the required setting and press the wheel button twice.
2. Turn the wheel until the focus is on the required number.
3. Press the wheel button.
4. Turn the wheel until the focus is on the required unit.
5. Press the wheel button.
Accessing the Functionality