User manual

Multimeter Measurements
R&S
®
Scope Rider RTH
100User Manual 1326.1578.02 ─ 04
5 Multimeter Measurements
The 4-channel R&S RTH1004 has 4 software-based voltmeters, which can measure in
parallel. For each voltmeter you can select the source and measurement type. See
Voltmeter (R&S RTH1004).
The 2-channel R&S RTH1002 has a hardware-based digital multimeter with two sepa-
rate banana plug inputs for various multimeter measurements. Except for voltages, the
DMM can also measure resistance, capacitance, temperature and more. See Digital
Multimeter (R&S RTH1002).
5.1 Voltmeter (R&S RTH1004)
The software-based voltmeter features AC, DC, AC+DC voltage measurements. Cur-
rent measurements are also possible if you use a shunt resistor or I/U converter.
5.1.1 Accessing the Meter Mode
1. Press the MODE key.
2. Select "Meter".
The multimeter interface is displayed.
5.1.2 Display and Control
The voltmeter display shows all 4 voltmeters at a glance, or only one voltmeter with
details and setup icons.
Voltmeter (R&S RTH1004)