User manual

Data Logging
R&S
®
Scope Rider RTH
116User Manual 1326.1578.02 ─ 04
Figure 6-4: Logger cursor with summarized data
1 = Maximum value of cursor line 1
2 = Maximum value of cursor line 2
Remote command:
LOGGer:CURSor<m>:TYPE on page 208
Track scaling
If enabled, the position of the cursor lines is adjusted if the scale is changed. The cur-
sor lines keep their relative position to the waveform.
If disabled, the cursor lines remain on their position on the display if the scaling is
changed.
Remote command:
LOGGer:CURSor<m>:SCPLing on page 208
Coupling
Couples the cursor lines so that the distance between the two lines remains the same
if one cursor is moved.
Remote command:
LOGGer:CURSor<m>:COUPling on page 209
Set to screen
Sets the cursors to a default position on the screen. This is helpful if the cursors have
disappeared from the display or need to be moved for a larger distance.
Remote command:
LOGGer:CURSor<m>:SCReen on page 209
6.5.2 Zoom
To analyze logged data, you can use the "Zoom" function, see also Chapter 3.1,
"Zoom", on page 72.
Analyzing Logged Data