User manual

Data Logging
R&S
®
Scope Rider RTH
117User Manual 1326.1578.02 ─ 04
The zoom is only available if enough data have been logged.
The zoom settings in logger mode are the same as in scope mode, but the time range
is much longer.
If data logging is running for more than 2 days and 7 hours, the logger compresses 4
logging values into a minimum, average and maximum value, see Figure 6-5.
Figure 6-5: Logger zoom with summarized data
1 = Maximum values
2 = Average values
3 = Minimum values
Description of settings
Access: "Zoom" menu
Figure 6-6: Zoom settings
Enable
Turns the zoom on or off.
Remote command:
LOGGer:ZOOM:ENABle on page 210
Analyzing Logged Data