User manual

Data Logging
R&S
®
Scope Rider RTH
119User Manual 1326.1578.02 ─ 04
1. Access the logger mode, see Chapter 6.1, "Accessing the Logger Mode",
on page 110.
2. Select the "Logger" menu.
3. If a data logging is running, press RUN STOP to stop logging.
4. Select the slot with the logs that you want to display.
5. Tap "Load Slot" to display the stored logs.
6.5.5 Deleting Logged Data
Logs stored on the slots can be deleted individually or all together.
To delete logs of a single slot:
1. Select the slot with the logs which you want to delete.
2. Tap "Clear Slot".
To delete logs on all slots:
► Tap "Clear All Slots".
6.5.6 Exporting Logged Data
You can save the logger records to a CSV or MAT file for further analysis. See Chap-
ter 9.4, "Logger Records", on page 142.
Analyzing Logged Data