User manual

Logic Analyzer (R&S RTH-B1 MSO)
R&S
®
Scope Rider RTH
135User Manual 1326.1578.02 ─ 04
8 Logic Analyzer (R&S RTH-B1 MSO)
The Mixed Signal Option R&S RTH-B1 adds logic analyzer functions to the classical
oscilloscope functions. Using the logic analyzer, you can analyze and debug embed-
ded systems with mixed-signal designs that use analog signals and time-correlated
digital signals simultaneously. The option provides a logic probe with 8 logic channels.
The instrument ensures that analog and digital waveforms are timealigned and
synchronized so that critical timing interactions between analog and digital signals can
be displayed and tested.
Each digital channel can be displayed on the screen and used as trigger source. Using
the pattern trigger, you can trigger on logical combinations of analog and digital chan-
nels. Additionally, you can define a trigger holdoff time.
► To activate or the logic analyzer, press the LOGIC key.
► To configure logic channels in the "Logic" menu, long-press the LOGIC key.
8.1 Logic Analyzer Settings
Access: "Logic" menu
Logic Analyzer Settings