User manual

Documenting Results
R&S
®
Scope Rider RTH
140User Manual 1326.1578.02 ─ 04
3. The current storage location is shown in "Setting Directory".
● To store the file under a default name in the specified directory, tap "Save Set-
ting".
● To store the file in another directory and/or with a user-defined filename, tap
"Save Setting As". Select the path, directory, and enter the filename.
To load and display a saveset
1. Press the FILE key.
2. Tap "Settings".
3. The current storage location is shown in "Setting Directory".
● To load a file from the specified directory, tap "Load Setting".
● To load a file from another directory, tap "Setting Directory" and change the
directory.
Tap "Load Setting".
4. Select the file to be loaded.
Description of settings
Load Setting
Opens the specified directory. Tap the file to be loaded.
Save Setting
Saves the settings to the specified directory with a default filename. The filename pat-
tern is: <filename base>_<date>_<time>.xml.
Save Setting As
Opens a file selection dialog. Navigate to the target directory and enter the filename.
Tap "Save" to store the file.
Setting Directory
Sets the directory to which the settings are stored with the "Save Setting" function.
Instrument Settings