User manual

General Instrument Setup
R&S
®
Scope Rider RTH
147User Manual 1326.1578.02 ─ 04
Set display language
Description of settings
User Interface Language
Select the language in which the functions and messages are displayed. Supported
languages are listed in the data sheet. The help is provided in English.
The instrument changes the language after a few seconds, a reboot is not required.
Time
Set the local time in the following order: hours / minutes / seconds.
Remote command:
SYSTem:TIME on page 230
Date
Set the date in the following order: year / month / day.
Remote command:
SYSTem:DATE on page 230
10.4 Options
All options are activated by license keys. No additional installation or hardware change
is required.
Unregistered licenses
Unregistered licenses are not assigned to a particular instrument. The instrument
accepts only registered licenses. If your license is delivered unregistered, use the
online tool R&S License Manager to register the license for your instrument. The regis-
tration of a permanent license is irreversible, so ensure that you register it for the cor-
rect instrument. The address of the tool is https://extranet.rohde-schwarz.com/service.
The "Active options" tab provides information on installed software options. Here you
can install new options or deactivate existing options using license keys.
Options