User manual

General Instrument Setup

R&S

Scope Rider RTH

150User Manual 1326.1578.02 ─ 04

4. If you received a key in written form, enter the key in the "Enter new option key"

field.

If you received a key in digital form as a file, tap "Install from file", select path /

media/USB1, and select the option key file.

5. If you want to activate several options, repeat step 3 for each option.

6. Restart the instrument.

10.5 Updating the Firmware

Your instrument is delivered with the latest firmware version. Firmware updates are

provided on the Internet at www.rohde-schwarz.com/product/rth.html > "Downloads" >

"Firmware". Along with the firmware file, you find the Release Notes describing the

improvements and modifications.

Make sure to update the firmware if a new version is available.

1. Download the firmware installation file RTH*.rsi, and save it to a USB flash drive.

2. Connect the USB flash drive to the USB connector on the right panel of the instru-

ment.

Press

4. Scroll down the menu and tap "Open File" under "Firmware Update".

5. Select the firmware file.

If you cannot see the RTH*.rsi file, select the path /media/USB1, and the folder

that contains the file.

6. Tap "Select".

Updating the Firmware