User manual

General Instrument Setup
R&S
®
Scope Rider RTH
152User Manual 1326.1578.02 ─ 04
Remote command:
DISPlay:PERSistence[:TYPE] on page 230
Persistence Time
User-defined persistence time if "Persistence Type" is "Time". Each new data point
remains on the screen for the duration defined here.
Remote command:
DISPlay:PERSistence:TIME on page 231
Grid Mode
Defines the grid display. A grid helps you identify the position of specific data points.
"Off"
No grid is shown.
"Dots"
Dots mark the intersections of the gridlines.
"Lines"
Displays the grid as horizontal and vertical lines.
Brightness
Changes the brightness of the touchscreen.
Remote command:
DIAGnostic:SERVice:LCD:BRIGthness on page 231
Show Probe Settings
Defines how long the probe settings of active channels are shown when you press a
channel key. The settings are shown on the top of the display.
The probe settings are always shown as long as the "Vertical" menu is open.
Display Off After
Defines when the display switches off if it is not used. Switching off the display saves
energy and prolongs the battery's operating time.
Display Settings