User manual

Network Connections
R&S
®
Scope Rider RTH
154User Manual 1326.1578.02 ─ 04
Description of settings
Interface
Select LAN or USB connection.
Status
Shows the connection status.
Hostname
Shows the computer name of the instrument.
In a LAN that uses a Domain Name System server (DNS server), each computer or
instrument can be accessed using a unique name instead of the IP address. The DNS
server translates the host name to the IP address. The host name is useful when a
DHCP server is used, as a new IP address is assigned each time the instrument is
restarted.
The default name is RTH-<serial_number>. You can change the name, but make sure
that the name is unique in the LAN.
DHCP
Enables dynamic TCP/IP configuration using the Dynamic Host Configuration Protocol
(DHCP). If DHCP is on, all address information is assigned automatically. Disable
DHCP if the network does not support this protocol.
IP Address / Subnet mask / Gateway / DNS Server
Shows the IP address and other address information for LAN connection.
LAN Connection