User manual

Remote Control Commands
R&S
®
Scope Rider RTH
164User Manual 1326.1578.02 ─ 04
Parameters:
<BandwidthLimit> FULL | B350 | B200 | B100 | B60 | B50 | B40 | B20 | B10 | B5 |
B4 | B2 | B1 | B5HK | B4HK | B2HK | B1HK | B50K | B40K |
B20K | B10K | B5K | B4K | B2K | B1K
FULL
At full bandwidth, all frequencies in the specified range are
acquired and displayed.
B350 | B200 | B100 | B60 | B50 | B40 | B20 | B10 | B5 | B4 | B2
| B1
Limit to 350 MHz, 200 MHz, 100 MHz, 60 MHz,..., respectively.
B5HK | B4HK | B2HK | B1HK | B50K | B40K | B20K | B10K |
B5K | B4K | B2K | B1K
Limit to 500 kHz, 400 kHz,..., respectively.
*RST:
FULL
CHANnel<m>:DESKew <Deskew>
Sets a delay for the selected channel.
Deskew compensates delay differences between channels caused by the different
length of cables, probes, and other sources.
Suffix:
<m>
.
1|2 (RTH1002) , 1..4 (RTH1004)
Parameters:
<Deskew> Deskew value
Range: -100E-9 to 100E-9
Increment: 800E-12
*RST: 0
Default unit: s
12.3.3 Horizontal Setup
TIMebase:SCALe...........................................................................................................164
TIMebase:RANGe..........................................................................................................165
TIMebase:HORizontal:POSition.......................................................................................165
TIMebase:REFerence.....................................................................................................165
ACQuire:POINts:ARATe?............................................................................................... 165
TIMebase:SCALe <Scale>
Sets the time scale of the horizontal axis for all signals.
Parameters:
<Scale> Range: 1E-9 to 500
Increment: Steps 1, 2, 5 (1, 2, 5, 10, 20, 50, 100, 200, 500...)
*RST: 100E-9
Default unit: s/div
Waveform Setup