User manual

Remote Control Commands
R&S
®
Scope Rider RTH
167User Manual 1326.1578.02 ─ 04
Parameters:
<AcquisitionMode> SAMPle | PDETect | HRESolution | AVERage | ENVelope
SAMPle
One of n samples in a sample interval is recorded as waveform
point, the other samples are discarded.
PDETect
The minimum and the maximum of n samples are recorded as
waveform points, the other samples are discarded.
HRESolution
The average of n captured sample points is recorded as one
waveform point.
AVERage
The average is calculated from the data of the current acquisi-
tion and a number of acquisitions before. The number of acquisi-
tions for average calculation is defined with ACQuire:
AVERage:COUNt.
ENVelope
The minimum and maximum values in an sample interval over a
number of acquisitions are saved. The most extreme values of
all acquisitions build the envelope.
*RST:
SAMPle
ACQuire:AVERage:COUNt <NoOfAvgs>
Sets the number of waveforms used to calculate the average waveform.
Parameters:
<NoOfAvgs> Range: 2 to 8192
Increment:
2
N
(N = 1 .. 13)
*RST: 2
ACQuire:ARESet:IMMediate
Restarts the envelope and average calculation.
Usage:
Event
ACQuire:POINts[:VALue]?
Returns the record length, number of recorded waveform samples.
Return values:
<RecordLength> Range: 1 to 500000
Increment: 1
*RST: 1
Usage: Query only
Waveform Setup