User manual

Remote Control Commands
R&S
®
Scope Rider RTH
198User Manual 1326.1578.02 ─ 04
CHANnel<m>:HISTory:PLAY.......................................................................................... 199
CHANnel<m>:HISTory:REPLay.......................................................................................199
CHANnel<m>:HISTory:TSABsolute?................................................................................200
CHANnel<m>:HISTory:TSDate?......................................................................................200
CHANnel<m>:HISTory:TSRelative?.................................................................................200
CHANnel<m>:HISTory[:STATe] <State>
Enables or disables the history function.
Parameters:
<State> ON | OFF
*RST: OFF
CHANnel<m>:HISTory:NSEGments <Depth>
Sets the approximate number of waveforms to be stored.
See also: "Number of Segments" on page 91.
Parameters:
<Depth> LOW | MEDium | HIGH
*RST: LOW
CHANnel<m>:HISTory:TPACq <PlayerSpeed>
Defines how fast the history player shows the stored waveforms.
Parameters:
<PlayerSpeed> AUTO | SLOW | MEDium | FAST
*RST: AUTO
ACQuire:AVAilable?
Shows the number of segements that are stored in the history.
Return values:
<AvailableAcqs> Range: 0 to 5000
Increment: 1
*RST: 0
Usage: Query only
CHANnel<m>:HISTory:STARt <StartAcqIdx>
Sets the index of the first (older) history segment that you want to see in the history
player. To query the number of available segments, use ACQuire:AVAilable?.
Waveform Analysis