User manual

Remote Control Commands
R&S
®
Scope Rider RTH
202User Manual 1326.1578.02 ─ 04
12.5.2 Mask Test
MASK:ONViolation[:SELection]....................................................................................... 202
MASK:RST....................................................................................................................202
MASK[:TESTstate]?....................................................................................................... 202
MASK:CHANnel<m>:RESult:FAIL:PERCentage?..............................................................202
MASK:CHANnel<m>:RESult:FAIL[:COUNt]?.....................................................................203
MASK:CHANnel<m>:RESult:PASS:PERCentage?............................................................ 203
MASK:CHANnel<m>:RESult:PASS[:COUNt]?...................................................................203
MASK:CHANnel<m>:RESult:TOTL[:COUNt]?................................................................... 204
MASK:ELAPsedtime:TOTal?...........................................................................................204
MASK:ELAPsedtime[:SECS]?......................................................................................... 204
MASK:ONViolation[:SELection] <SelectedActions>
Defines the action to be executed if a violation occurs.
Parameters:
<SelectedActions> NONE | STOP | BEEP | BPSTop
*RST: NONE
MASK:RST
Sets the counters of passed and failed acquisitions to Zero.
Usage:
Event
MASK[:TESTstate]?
Returns the state of the mask test.
Return values:
<TestState> NOMask | IDLE | RUNNing
NOMask
No mask is active and no testing possible.
IDLE
Mask test has been stopped or not yet started.
RUNNing
Test ist running.
*RST: NOMask
Usage: Query only
MASK:CHANnel<m>:RESult:FAIL:PERCentage?
Returns the percentage share of failed acquisitions.
Suffix:
<m>
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Mask Testing