User manual

Remote Control Commands
R&S
®
Scope Rider RTH
209User Manual 1326.1578.02 ─ 04
Parameters:
<TrackScaling> ON | OFF
*RST: OFF
LOGGer:CURSor<m>:COUPling <Coupling>
Couples the cursor lines so that the distance between the two lines remains the same
when one cursor is moved.
Suffix:
<m>
.
1..2
Parameters:
<Coupling> ON | OFF
*RST: OFF
LOGGer:CURSor<m>:SCReen
Sets the cursors to a default position on the screen.
Suffix:
<m>
.
1..2
Usage: Event
12.7.2.2 Cursor Results
LOGGer:CURSor<m>:POSition.......................................................................................209
LOGGer:CURSor:TDELta?............................................................................................. 210
LOGGer:CURSor<m>:RESult<n>[:AMPLitude]?................................................................210
LOGGer:CURSor<m>:POSition
<Year>,<Month>,<Day>,<Hours>,<Minutes>,<Seconds>,<TenthsOfSecond>
Sets the positions of the cursor lines.
Suffix:
<m>
.
1..2
Specifies the cursor line.
Parameters:
<Year> Range: 2015 to 9999
Increment: 1
*RST: 2015
<Month> Range: 1 to 12
Increment: 1
*RST: 1
<Day> Range: 1 to 31
Increment: 1
*RST: 1
Data Logging