User manual

Remote Control Commands
R&S
®
Scope Rider RTH
210User Manual 1326.1578.02 ─ 04
<Hours> Range: 0 to 23
Increment: 1
*RST: 1
<Minutes> Range: 0 to 59
Increment: 1
*RST: 1
<Seconds> Range: 0 to 59
Increment: 1
*RST: 0
<TenthsOfSecond> Range: 0 to 9
Increment: 1
*RST: 0
LOGGer:CURSor:TDELta?
Returns the time difference of the cursor lines.
Return values:
<Day>,<Hour>,<Min>,<Sec>,<ZSec>
Usage: Query only
LOGGer:CURSor<m>:RESult<n>[:AMPLitude]?
Returns the measured value at the specified cursor line.
Suffix:
<m>
.
1..2
Specifies the cursor line.
<n> 1..4
Specifies the measurement.
Return values:
<Yvalue> Measurement value
Usage: Query only
12.7.3 Zoom in Logger mode
LOGGer:ZOOM:ENABle................................................................................................. 210
LOGGer:ZOOM:SCALe.................................................................................................. 211
LOGGer:ZOOM:POSition................................................................................................211
LOGGer:ZOOM:ENABle <Zoom Enabled>
Enables or disables the logger zoom.
Data Logging