Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1052 500 MHz 500 null 10 Bit
241242243244245246247248249250
Remote Control Commands
R&S
®
Scope Rider RTH
211User Manual 1326.1578.02 ─ 04
Parameters:
<Zoom Enabled> ON | OFF
*RST: OFF
LOGGer:ZOOM:SCALe <Zoom Scale>
Sets the time scale of the zoomed waveform.
Parameters:
<Zoom Scale> AUTO | S1 | S2 | S4 | S5 | S10 | S20 | S40 | M1 | M2 | M4 | M5 |
M10 | M20 | M40 | H1 | H2 | H4 | H5 | H10 | H20 | D1 | D2 | D4
LOGGer:ZOOM:POSition
<Year>,<Month>,<Day>,<Hour>,<Min>,<Sec>
Sets the center position of the zoomed area in relation to the left side of the display.
12.7.4 Logger Statistics
LOGGer:RECording:STARt?........................................................................................... 211
LOGGer:RECording:TOTal?............................................................................................211
LOGGer:MEASurement<m>:RESult:CURRentsampl?....................................................... 212
LOGGer:MEASurement<m>:RESult:MAXimum:POSition?................................................. 212
LOGGer:MEASurement<m>:RESult:MAXimum:VALue?.................................................... 212
LOGGer:MEASurement<m>:RESult:MINimum:POSition?.................................................. 212
LOGGer:MEASurement<m>:RESult:MINimum:VALue?..................................................... 213
LOGGer:MEASurement<m>:RESult:MEAN?.....................................................................213
LOGGer:MEASurement<m>:RESult:STDDev?..................................................................213
LOGGer:MEASurement<m>:ENABled?............................................................................213
LOGGer:MEASurement<m>:TYPE?................................................................................ 214
LOGGer:MEASurement<m>:SOURce?............................................................................ 214
LOGGer:RECording:STARt?
Returns the absolute start time of the current loggin session.
Return values:
<StartTime> Year, month, day, hour, minute, second, decisecond, for exam-
ple 2015,10,29,16,10,22,2
Usage: Query only
LOGGer:RECording:TOTal?
Returns the total duration of the current logging session.
Return values:
<Day>;<Hour>;<Min>;<Sec>;<ZSec>For example: 1;1;42;32;2
Usage: Query only
Data Logging