User manual

Getting Started
R&S
®
Scope Rider RTH
12User Manual 1326.1578.02 ─ 04
this manual is delivered with the instrument in printed form. Editions in other lan-
guages, as well as newest version of the English one, are available on the product
website.
●
User Manual
The user manual describes all instrument modes and functions in detail. It also pro-
vides an introduction to remote control and a complete description of the remote
control commands with programming examples. The newest version of the manual
is available in English on the R&S RTH product website at www.rohde-
schwarz.com/product/rth.html > "Downloads > Manuals".
●
Data Sheet
The data sheet contains the complete instrument specification. It also lists the
options and their order numbers as well as optional accessories. The data sheet is
available on the R&S RTH product website at www.rohde-schwarz.com/product/
rth.html > "Downloads" > "Brochures and Data Sheets".
●
Calibration Certificate
The document is available on https://gloris.rohde-schwarz.com/calcert.
●
CE Declaration of Conformity
The document is available on www.rohde-schwarz.com/en/products/test-measure-
ment/oscilloscopes/pg_overview_63663.html.
●
Open Source Acknowledgment
The Open Source Acknowledgment document provides verbatim license text of
open source software that is used in the instrument's firmware. It is available on the
R&S RTH website at www.rohde-schwarz.com/product/rth.html > "Downloads" >
"Firmware", and it can be read directly on the instrument.
1.1.5 Regulatory Information
Part 15 of the FCC and RSS-210 of IC Rules
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
●
this device may not cause harmful interference, and
●
this device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appa-
reils radio exempts de licence. L'exploitation est autorisée aux deux conditions sui-
vantes:
●
l'appareil ne doit pas produire de brouillage, et
●
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications made to this equipment not expressly approved by
Rohde & Schwarz may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
Preface