User manual

Getting Started
R&S
®
Scope Rider RTH
14User Manual 1326.1578.02 ─ 04
1. Inspect the package for damage.
If the packaging material shows any signs of stress, notify the carrier as well as
your Rohde & Schwarz service center. Keep the package and cushioning material
for inspection. Keep a damaged package and the cushioning material until the con-
tents have been checked for completeness and the instrument has been tested.
2. Unpack the handheld scope and the accessories and check the contents for com-
pleteness, see "Package contents" on page 14.
If anything is missing, contact your Rohde & Schwarz service center.
3. Inspect the handheld scope and the accessories.
If there is any damage or defect, or if the R&S RTH does not operate properly,
notify your Rohde & Schwarz service center.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped at a later date, you can use the material to protect the control elements and con-
nectors.
Package contents
The delivery package contains the following items:
●
R&S RTH handheld scope
●
4 Gbyte microSD card, installed in the battery compartment
●
Power adapter with cable and adapter set for various socket types
●
Battery pack
●
R&S RT-ZI10 probes (2x for R&S RTH1002; 4x for R&S RTH1004)
●
DMM test leads (only for R&S RTH1002)
●
Hand strap, attached on the handheld scope
●
Printed "Getting Started" manual and "Basic Safety Instructions" brochure
Optional accessories and their order numbers are listed in the data sheet.
1.2.2 Inserting and Charging the Battery
Before you can use the handheld scope for the first time, insert the battery pack and
charge it.
Preparing for Use