Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1052 500 MHz 500 null 10 Bit
41424344454647484950
Getting Started
R&S
®
Scope Rider RTH
15User Manual 1326.1578.02 ─ 04
Risk of electrical shock during battery replacement
●
Disconnect power supply, probes, test leads and all other cables before opening
the battery cover.
●
Use only the specified Li-Ion battery pack, which is delivered with the instrument.
You can order additional battery packs at Rohde & Schwarz, see Data Sheet for
order number.
●
Do not operate the instrument with the battery cover open.
●
Use only the specified power adapter, which is delivered with the instrument.
1. Fold out the tilt stand on the back of the instrument.
2. Screw open the battery cover.
3. Insert the battery pack.
4. Screw down the battery cover.
5. Connect the power adapter to the connector on the left side of the scope, and fully
charge the battery. Charging may take a few hours.
Preparing for Use