Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1052 500 MHz 500 null 10 Bit
41424344454647484950
Getting Started
R&S
®
Scope Rider RTH
16User Manual 1326.1578.02 ─ 04
If the instrument is on, the battery status is shown on the display.
Replace used batteries periodically by new batteries after 24 months of usage.
Observe the safety regulations in the "Batteries and rechargeable batteries/cells" chap-
ter in the "Basis Safety Instructions" brochure, which is delivered with the instrument.
1.2.3 Powering On/Off
►
Press the
POWER key to switch the instrument on or off.
The POWER key lights up in green color if power is on.
1.2.4 Using the Tilt Stand
The R&S RTH has a tilt stand for proper handling while the scope is placed on a table.
► Pull the tilt stand as shown below.
Preparing for Use