User manual

Getting Started
R&S
®
Scope Rider RTH
20User Manual 1326.1578.02 ─ 04
1.3.2 Top View
The R&S RTH1002 has two BNC input connectors CH1 and CH2, and two 4mm
banana plug inputs for various multimeter measurements. The channel inputs have
double channel-to-channel isolation that allows for independent floating measurements
at each input. The DMM input is fully isolated from scope inputs, interfaces and
ground.
Figure 1-5: Top view of R&S RTH1002
The R&S RTH1004 has four BNC input connectors CH1, CH2, CH3, CH4. The channel
inputs have double channel-to-channel isolation that allow for independent floating
measurements at each input.
See also: Chapter 1.1.2, "Input Isolation", on page 9.
Figure 1-6: Top view of R&S
RTH1004
Instrument Tour