Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1052 500 MHz 500 null 10 Bit
61626364656667686970
Getting Started
R&S
®
Scope Rider RTH
33User Manual 1326.1578.02 ─ 04
Key Short press Long press
LEVEL activates the trigger level to be set using the wheel. If the trigger type has
two trigger levels, pressing the key toggles the upper and lower levels.
ACQUIRE opens or closes the "Acquire" dialog to adjust the acquisition mode.
POWER key: switches the power on or off
1.4.2 Selecting the Mode
A mode comprises all settings and functions that are needed to perform a measure-
ment task. Selecting the mode is the first setup step.
1. Press the MODE key.
2. Select the mode:
● On the touchscreen: Tap the required mode icon.
● Using controls: Turn the wheel until the required mode is marked, and press
the wheel button to select the mode.
Remote command:
OP[:MODE] on page 159
Operating Basics