User manual

Getting Started
R&S
®
Scope Rider RTH
34User Manual 1326.1578.02 ─ 04
1.4.3 Displaying an Unknown Signal
The R&S RTH can display unknown, complex signals automatically. The AUTOSET
function analyzes the enabled channel signals, and adjusts the horizontal, vertical, and
trigger settings to display stable waveforms.
1. Press the PRESET key.
PRESET sets the instrument to a default factory state. The previous user-defined
configuration is removed and all channels except for channel 1 are disabled.
2. Press the AUTOSET key.
The waveform is displayed.
1.4.4 Getting Information and Help
In most dialogs, graphics explain the meaning of the selected setting. For further infor-
mation, you can open the help, which provides functional description of the settings
with links to the corresponding remote commands, and background information.
1.4.4.1 Displaying Help
●
"To open the help window" on page 34
●
"To show information on a setting" on page 35
●
"To close the help window" on page 35
To open the help window
► Tap the "Help" icon on the top of the menu.
If a dialog is open, the dialog's help topic is shown beside the dialog.
If a menu is open, the table of contents is shown.
Operating Basics