Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentHandheld (scope-meter) RTH1052 500 MHz 500 null 10 Bit
71727374757677787980
Waveform Setup
R&S
®
Scope Rider RTH
40User Manual 1326.1578.02 ─ 04
2.2 Vertical Setup
The controls and parameters of the vertical system are used to scale and position the
waveform vertically.
1. To set vertical scale and position, use the RANGE and POS keys.
2. To adjust other vertical settings, select "Vertical" in the main menu.
As long as the "Vertical" menu is open, the probe settings of active channels are
shown on top of the display.
Vertical scale and vertical position directly affect the resolution of the waveform ampli-
tude. To get the full resolution, waveforms should cover most of the sceen's height.
Description of settings
Vertical Setup