User manual

Waveform Setup
R&S
®
Scope Rider RTH
56User Manual 1326.1578.02 ─ 04
Pulse Type
Sets the type of the sync pulse, either bi-level sync pulse (usually used in SDTV sig-
nals), or tri-level sync pulse (used in HDTV signals).
Figure 2-9: Bi-level (left) and tri-level (right) sync pulses
This setting is available for user-defined video signals if "Standard" is set to "Custom".
Line Period
Sets the duration of a line, the time between two successive sync pulses.
Line period
This setting is available for user-defined video signals if "Standard" is set to "Custom".
Pulse Width
Sets the width of the sync pulse.
Pulse width
Trigger