User manual

Waveform Setup
R&S
®
Scope Rider RTH
68User Manual 1326.1578.02 ─ 04
Description of settings
Figure 2-17: Timeout Trigger
Range
Selects the relation of the signal level to the trigger level:
"Stays High"
The signal level stays above the trigger level.
"Stays Low"
The signal level stays below the trigger level.
"High or Low"
The signal level stays above or below the trigger level.
Remote command:
TRIGger:TIMeout:RANGe on page 184
Time
Defines the time limit for the timeout at which the instrument triggers.
Remote command:
TRIGger:TIMeout:TIME on page 184
2.5.13 Interval Trigger (R&S RTH-K19)
The interval trigger analyzes the time between two pulses.
► SETUP key > "Trigger Type" = "Interval"
Trigger