Datasheet

Version 08.00, March 2016
16 Rohde & Schwarz R&S
®
RTH1002, R&S
®
RTH1004 Scope Rider
R&S
®
RTH-K1
I
2
C serial triggering and decoding
Protocol configuration bit rate up to 3.4 Mbps (auto-detected)
auto threshold setup assisted threshold configuration for I
2
C
triggering and decoding (software)
device list associate frame address with symbolic ID
(software)
Trigger source (clock and data) any input channel or logical channel
trigger event setup start, stop, restart, missing ACK, address,
data, address + data
address setup 7 bit or 10 bit address (value in hex or
binary); read, write or either; condition =, ≠
data setup data pattern up to 8 byte (hex or binary);
condition =, ≠; >, <; offset within frame in
range from 0 byte to 4095 byte
Decode source (clock and data) any input channel, logical channel
display type decoded bus, tabulated list
color coding frame, start/restart, address (r/w), data,
ACK/NACK, stop, error
address and data format hex, decimal, octal, binary, ASCII;
symbolic names for user-defined subset
of addresses (software)
SPI serial triggering and decoding
Protocol configuration type 2-wire, 3-wire and 4-wire SPI
bit rate up to 50 Mbps (auto-detected)
bit order LSB first, MSB first
word size 4/8/12/16/20/24/28/32 bit
frame condition SS, timeout
polarity (MOSI, MISO, SS) active high, active low
slope (CLK) rising edge, falling edge
auto threshold setup assisted threshold configuration for SPI
triggering and decoding (software)
Trigger source (MOSI, MISO, SS, CLK) any input channel or logical channel
trigger event setup start of frame, end of frame, MOSI, MISO
data setup data pattern up to 32 bit (hex or binary);
condition =, ≠; offset within frame in range
from 0 to 4095 bit
Decode source (MOSI, MISO, SS, CLK) any input channel, logical channel
display type decoded bus, tabulated list
color coding Frame start, frame stop, word, error
data format hex, decimal, octal, binary, ASCII
(software)