Datasheet

Version 08.00, March 2016
Rohde & Schwarz R&S
®
RTH1002, R&S
®
RTH1004 Scope Rider 5
DC measurement accuracy after adequate suppression of
measurement noise by using high-
resolution sampling mode or waveform
averaging or a combination of both
±( DC gain accuracy ×
|reading – net offset| + offset accuracy )
Channel-to-channel isolation
(each channel at same input sensitivity)
input frequency < analog bandwidth > 40 dB (meas.)
Horizontal system
Timebase range selectable between 1 ns/div and 500 s/div
Channel deskew ±100 ns
Reference position 10 %, 50 % or 90 % of measurement
display area
Trigger offset range max. at least 2 s or 2000 screen widths
at most 100 000 s
min. right edge of measurement display area
Timebase accuracy ±10 ppm
Acquisition system
Maximum realtime sampling rate R&S
®
RTH1004 1 channel with 5 Gsample/s
2 channels with 2.5 Gsample/s
4 channels with 1.25 Gsample/s
R&S
®
RTH1002 1 channel with 5 Gsample/s
2 channels with 2.5 Gsample/s
Maximum acquisition length at sampling rate of 5 Gsample/s 500 ksample
at sampling rate of 2.5 Gsample/s 250 ksample for each channel
at sampling rate of 1.25 Gsample/s 125 ksample for each channel
Acquisition modes sample first sample in decimation interval
high resolution average value of samples in decimation
interval
peak detect largest and smallest sample in decimation
interval
envelope envelope of acquired waveforms;
for timebases requiring decimation,
peak-detect is used.
average average of acquired waveforms;
for timebases requiring decimation, high
resolution is used. Number of averaged
waveforms can be power of 2 from 2 to
8192.
Realtime waveform acquisition rate max. 50 000 waveforms/s
Trigger system
(see also R&S
®
RTH-B1 mixed signal option)
Trigger level range ±4 div from center of screen
Trigger modes auto, normal, single
Trigger sources R&S
®
RTH1004 CH1, CH2, CH3, CH4
R&S
®
RTH1002 CH1, CH2
Hold-off range time 8 ns to 10 s, fixed and random
events 1 to 1 000 000 000 events
Trigger types
Edge triggers on specified slope (positive, negative or either) and level
Glitch triggers on glitches of positive, negative or either polaritiy that are shorter or longer
than specified width
glitch width 200 ps to 5000 s
Width triggers on positive or negative pulse of specified width; width can be shorter, longer,
inside or outside the interval
pulse width 200 ps to 5000 s