User manual

Getting Started
R&S
®
Spectrum Rider FPH
32User Manual 1321.1011.02 ─ 05.00
17 = Rotary knob
18 = Screenshot key
19 = LAN and mini USB ports (behind protective cap)
**20 = SD Card Slot (not visible as it is located behind the battery compartment)
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument. For example,
cleaning agents that contain a solvent may damage the front panel labeling, plastic
parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc.), acids, bases, or
other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lintfree dust
cloth.
3.2.2 Connectors of the R&S Spectrum Rider
The R&S Spectrum Rider has several connectors. The connectors are either on the
upper, left or right side of the instrument.
● RF Input.................................................................................................................. 32
● BNC Connector.......................................................................................................33
● Headphone Jack..................................................................................................... 34
● USB Port................................................................................................................. 34
● DC Port................................................................................................................... 34
● Mechanical Locking Device.....................................................................................35
● Mini USB and LAN Port...........................................................................................35
● SD Card Slot........................................................................................................... 36
3.2.2.1 RF Input
The RF input 50Ω is located on the top of the R&S Spectrum Rider.
Connect a cable or DUT to the RF input with an N connector. Use a cable to connect
the DUT to the R&S Spectrum Rider, if necessary.
Make sure not to overload the R&S Spectrum Rider when a DUT is connected.
The maximum power that is permissible at the RF input is 20 dBm (or 100 mW).
Instrument Tour