User manual

Getting Started
R&S
®
Spectrum Rider FPH
44User Manual 1321.1011.02 ─ 05.00
Select "Analysis" to configure
trace mode, trace detector and
the number of count used to
average up the measurement for
the trace display.
It also provides configuration to
set the "Trace Math" method
used to calculate the differences
in the current trace measure-
ment and measurement saved
in the memory.
Select "Trigger" to configure the
trigger source, trigger level and
the trigger delay setting on the
spectrum measurement.
3.2.4 On-screen Keyboard
The on-screen keyboard is an additional means of interacting with the instrument. It
provides convenience of usage with the touchscreen input.
Accessing the on-screen keyboard is only available for text-based entry, e.g. save or
open a filename.
Touchscreen interface
If the touchscreen interface is not activated, the on-screen keyboard is disabled.
The on-screen keyboard display can be switched on and off using the on-screen key-
board
icon highlighted at the top right-hand corner.
Instrument Tour