Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentRTB2K-102M Digital 100 MHz 18-channel 1.25 GSa/s 10 Mpts 10 Bit Digital storage (DSO), Multimeter funct
161162163164165166167168169170
Network Connections and Remote Operation
R&S
®
RTB2000
162User Manual 1333.1611.02 ─ 06
11 Network Connections and Remote Opera-
tion
11.1 LAN Connection
The R&S RTB2000 is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). A LAN connection is necessary for remote control
of the instrument, and for access from a computer using a web browser.
Connecting the instrument to the LAN
1. Connect the LAN cable to the LAN connector at the rear panel of the instrument.
2. Open the "Setup" menu.
3. Tap "Interface".
If the menu items are grayed, the connection failed. Check the connection of the
LAN cable and the network availability.
4. Tap "Ethernet" to select LAN connection.
5. Tap "Parameter".
You see all connection details on the display, and you can save them to a file.
LAN Connection