Manualshelf

User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentRTB2K-102M Digital 100 MHz 18-channel 1.25 GSa/s 10 Mpts 10 Bit Digital storage (DSO), Multimeter funct
341342343344345346347348349350
Remote Control Commands
R&S
®
RTB2000
345User Manual 1333.1611.02 ─ 06
Parameters:
<Yaddition> The value is added to the y-values of the upper mask limit and
subtracted from the y-values of the lower mask limit.
Default unit: div
MASK:SAVE <Filename>
Saves the current mask in the specified file.
Setting parameters:
<Filename> String parameter
Path and file name
Usage: Setting only
MASK:LOAD <Filename>
Loads a stored mask from the specified file.
Setting parameters:
<Filename> String parameter
Path and file name
Usage: Setting only
15.8.2.2 Actions on Violation
MASK:ACTion:SOUNd:EVENt:MODE.............................................................................. 345
MASK:ACTion:STOP:EVENt:MODE.................................................................................345
MASK:ACTion:SCRSave:EVENt:MODE........................................................................... 345
MASK:ACTion:WFMSave:EVENt:MODE.......................................................................... 345
MASK:ACTion:PULSe:EVENt:MODE............................................................................... 345
MASK:ACTion:STOP:EVENt:COUNt................................................................................346
MASK:ACTion:SCRSave:DESTination............................................................................. 346
MASK:ACTion:WFMSave:DESTination.............................................................................346
MASK:ACTion:YOUT:ENABle..........................................................................................347
MASK:ACTion:SOUNd:EVENt:MODE <EventMode>
MASK:ACTion:STOP:EVENt:MODE <EventMode>
MASK:ACTion:SCRSave:EVENt:MODE <EventMode>
MASK:ACTion:WFMSave:EVENt:MODE <EventMode>
MASK:ACTion:PULSe:EVENt:MODE <EventMode>
Defines when and how often the action is executed.
●
SOUNd: Generates a beep sound on mask violation.
●
STOP: Stops the waveform acquisition, after mask is violated for a defined number
of times. You can set how many times with the command MASK:ACTion:STOP:
EVENt:COUNt.
Applications