User manual

Fernsteuerbefehle
R&S
®
RTB2000
284Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<Unit> V | A
PROBe<m>:SETup:ATTenuation:MANual <ManualAttenuation>
Sets the attenuation or gain of the probe.
Suffix:
<m>
.
1..4
Selects the input channel. The number of channels depends on
the instrument.
Parameter:
<ManualAttenuation> Bereich: 0.001 bis 10000
*RST: 1
15.4.5
Horizontale Einstellungen
TIMebase:SCALe...........................................................................................................284
TIMebase:POSition........................................................................................................ 284
TIMebase:REFerence.....................................................................................................285
TIMebase:ACQTime.......................................................................................................285
TIMebase:RANGe..........................................................................................................285
TIMebase:DIVisions?......................................................................................................285
TIMebase:RATime?........................................................................................................285
TIMebase:SCALe <TimeScale>
Sets the horizontal scale for all channel and math waveforms.
Parameter:
<TimeScale> Bereich: 1e-9 bis 50; lower limits are possible if zoom or
FFT is enabled.
Inkrement: 1e-9
*RST: 100e-6
Std.-einheit: s/div
TIMebase:POSition <Offset>
Defines the trigger position, the time distance from the trigger point to the reference
point (trigger offset). The trigger point is the zero point of the diagram. Changing the
horizontal position, you can move the trigger, even outside the screen.
See also: TIMebase:REFerence auf Seite 285
Parameter:
<Offset> Bereich: Depends on time base setting
Inkrement: 0.01
*RST: 0
Std.-einheit: s
Grundeinstellungen