User manual

ManualsBrandsROHDE & SCHWARZ ManualsLaboratory Test EquipmentRTB2K-102M Digital 100 MHz 18-channel 1.25 GSa/s 10 Mpts 10 Bit Digital storage (DSO), Multimeter funct

411

412

413

414

415

416

417

418

419

420

Fernsteuerbefehle

R&S

RTB2000

416Bedienhandbuch 1333.1611.03 ─ 05

BUS:SSPI:MISO:SOURce <MisoSource>

Selects the input channel of the optional MISO line.

Suffix:

1, bus 2 is not available if the MISO source is used.

Parameter:

<MisoSource> CH1 | CH2 | CH3 | CH4 | NONE | D0..D15

*RST: NONE

BUS:SSPI:DATA:POLarity <Polarity>

Selects whether transmitted data is high active (high = 1) or low active (low = 1) on the

data line.

Suffix:

1 | 2

Parameter:

<Polarity> POSitive | NEGative

POSitive = high active

NEGative = low active

*RST: POSitive

BUS:SSPI:MOSI:POLarity <MosiPolarity>

Selects if transmitted data is high active (high = 1) or low active (low = 1) on the MOSI/

MISO line.

Suffix:

1 | 2

Parameter:

<MosiPolarity> ACTLow | ACTHigh

*RST: ACTH

BUS:SSPI:MISO:POLarity <MisoPolarity>

Selects whether transmitted data is high active (high = 1) or low active (low = 1) on the

MISO line.

Suffix:

1, bus 2 is not available if the MISO source is used.

Parameter:

<MisoPolarity> ACTLow | ACTHigh

*RST: ACTH

Analyse serieller Busse