HMC8015_bro_en_3607-3374_12_v0100.indd 1 Product Brochure | 01.00 Test & Measurement R&S®HMC8015 Power Analyzer All in one: the new compact class that has it all 09.02.
R&S®HMC8015 Power Analyzer At a glance The R&S®HMC8015 power analyzer is the first compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2.
R&S®HMC8015 Power Analyzer Benefits and key features Clear display of all measured parameters ❙❙ Brilliant QVGA color display (320 x 240 pixel) ❙❙ Simultaneous display of up to 10 numerical measurement functions ❙❙ User‑configurable measurement display ❙❙ Graphical display modes 1) for inrush, harmonic analysis, waveform and trend chart Measurement accuracy ❙❙ Basic accuracy: 0.
Enhanced functions As seen in the table, up to three options can be added to the base unit. They can be ordered directly from the factory (HOC15x) or at later time (HVC15x) as a voucher. HOC151/HVC151 advanced analysis option The advanced analysis option complements the base unit's measurands by also displaying peak values for voltage, current and power. These are acquired seamlessly at the full sampling rate of 500 ksample/s.
Harmonic analysis Harmonic analysis can be displayed in a table or graph or even logarithmically for better readability. The bargraph can optionally show up to the 50th harmonic of voltage and/or current. The bargraph shows the am‑ plitude of the harmonic selected with the cursor. Waveform function The waveform function shows the voltage, current and power of an input signal period over time. The example shows a load with phase-angle control.
HOC152/HVC152 advanced I/O option The advanced I/O option activates the following additional functions: Sensor input A current‑proportional voltage of 100 mV, 1 V or 4 V (full‑scale amplitude) can be applied to the sensor input (4 mm safety connectors) in order to significantly expand the power measurement range. Current probes, current transformers and shunts can be connected to the input. The gradient (e.g. mV/A) can be set individually.
Specifications Specifications Analog bandwidth DC to 100 kHz Frequency accuracy A/D converter resolution 0.1 % of reading voltage and current 16 bit Basic accuracy 0.
Measurement ranges and accuracy Measurement ranges CF3 CF6 Peak value 5V 15 V 30 V 60 V 150 V 300 V 600 V Current (500 mΩ) 5 mA 10 mA 20 mA 50 mA 100 mA 200 mA Current (10 mΩ) 0.5 A 1A 2A 5A 10 A 20 A Sensor 0.033 V 0.33 V 1.33 V Measurement accuracy (± displayed in % ± peak value range in %) 2.5 V 7.5 V 15 V 30 V 75 V 150 V 300 V 2.5 mA 5 mA 10 mA 25 mA 50 mA 100 mA 0.25 A 0.5 A 1A 2.5 A 5A 10 A 0.0165 V 0.165 V 0.
Ordering information Designation Type Order No Power Analyzer R&S®HMC8015 3593.8646.02 Power Analyzer, with IEEE-488 (GPIB) interface R&S®HMC8015-G 3593.8875.02 Advanced Analysis, voucher upgrade HVC151 3622.0795.02 Advanced Analysis, factory direct order HOC151 3622.0789.02 Advanced I/O, voucher upgrade HVC152 3622.3788.02 Advanced I/O, factory direct order HOC152 3622.3542.02 Compliance Test, voucher upgrade HVC153 3622.3794.02 Compliance Test, factory direct order HOC153 3622.
Service that adds value ❙ ❙ ❙ ❙ ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long‑term dependability About Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation.