Datasheet

Measurement with the
Logic Probe
R Logic Probe HO3508 for MSO Extension, also available
in a double Package as HO3516 (2 x HO3508)
R With the Logic Probe HO3508, 8 Logic Channels
(LCH 0…LCH 7 or LCH 8…LCH 15) are available in MSO Mode
R The Display on the Oscilloscope will be either
as individual Channels or as a Bus Display
R Decoding may be in the ASCII, Binary, Decimal or
Hexadecimal Formats
R The Threshold can be adjusted for 8 Logic Channels
as a Group at the Oscilloscope
R The Activation of the Logic Channels is indicated
by a LED on the Logic Probe
Specifications HO3508
Channels: 8
Input Impedance: 100 kΩ II <4 pF
Max. Input Frequency: 350 MHz
Max. Input Voltage: 40 V (DC + peak AC)
Measuring Category: CAT I
Cable Length: approx. 1 m
HO3508[HO3516] Logic Probe for all Oscilloscopes of the HMO Series
Multi pin Connector
for Connection of the
Logic Probe
HO3508/HO3516E/280812 · C&E · Subject to change without notice · © HAMEG Instruments GmbH
®
· DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel [phone] · Fax [phone] · www.hameg.com · [e-mail]