Datasheet

ManualsBrandsROHDE & SCHWARZ ManualsTest Leads & ProbesProbe 1 GHz 10:1 20 V HZO30

Attenuation ratio: 10:1

Bandwidth: 250 MHz

Rise time: <1.4 ns

Input impedance: 10 MΩ II 10 pF

Max. Voltage: 600 V (DC + peak AC)

LF compensation: 1 Trimmer

RF compensation: 2 Trimmer

Cable length: 1.2 m

Measuring category: CAT I

HZ52 Probe 10:1

Attenuation ratio: 1:1

Switchable: 10:1

Bandwidth: 10/100 MHz

Rise time : <35/3.5 ns

Input impedance: 1/10 MΩ II 82/12 pF

Max. Voltage: (10:1) 600 V (DC + peak AC)

LF compensation: 1 Trimmer at 10:1

RF compensation: 2 Trimmer at 10:1

Cable length: 1.2 m

Measuring category: CAT I

HZ154 Probe 1:1/10:1

Attenuation ratio: 10:1

Bandwidth: 500 MHz

Rise time: <700 ps

Input impedance: 10 MΩ II 9.5 pF

Max. Voltage: 400 V (DC + peak AC)

LF compensation: 1 Trimmer

RF compensation: 2 Trimmer

Cable length: 1.3 m

Probe factor identification: automatically after connection

Measuring category: CAT I

HZ355 Probe 10:1

Attenuation ratio: 10:1

Bandwidth: 350 MHz

Rise time: <1.0 ns

Input impedance: 10 MΩ II 12 pF

Max. Voltage: 400 V (DC + peak AC)

LF compensation: 1 Trimmer

RF compensation: 2 Trimmer

Cable length: 1.2 m

Probe factor identification: automatically after connection

Measuring category: CAT I

HZ350 Probe 10:1

Attenuation ratio: 10:1

Bandwidth: 150 MHz

Rise time: <2.4 ns

Input impedance: 10 MΩ II 12 pF

Max. Voltage: 600 V (DC + peak AC)

LF compensation: 1 Trimmer

RF compensation: 1 Trimmer

Cable length: 1.2 m

Measuring category: CAT I

HZ51 Probe 10:1

Summary of content (4 pages)

PAGE 1
HZ154 Probe 1:1/10:1 Attenuation ratio: Switchable: Bandwidth: Rise time : Input impedance: Max. Voltage: LF compensation: RF compensation: Cable length: Measuring category: 1:1 10:1 10/100 MHz <35/3.5 ns 1/10 MΩ II 82/12 pF (10:1) 600 V (DC + peak AC) 1 Trimmer at 10:1 2 Trimmer at 10:1 1.2 m CAT I Attenuation ratio: Bandwidth: Rise time: Input impedance: Max. Voltage: LF compensation: RF compensation: Cable length: Probe factor identification: Measuring category: 10:1 500 MHz <700 ps 10 MΩ II 9.
PAGE 2
HZ53 Probe 100:1 Attenuation ratio: Bandwidth: Rise time: Input impedance: Max. Voltage: LF compensation: Cable length: Measuring category: 100:1 100 MHz <3.5 ns 100 MΩ II 4.5 pF 1,200 V (DC + peak AC) 1 Trimmer 1.2 m CAT I Attenuation ratio: Bandwidth: Rise time: Input impedance: Max. Voltage: LF compensation: RF compensation: Cable length: Probe factor identification: Measuring category: 1,000:1 400 MHz <900 ps 50 MΩ II 7.5 pF 1,000 Vrms 1 Trimmer 1 Trimmer 1.
PAGE 3
HZ100 Differential Probe 20:1/200:1 Technical specifications at 23 °C ±2 °C Differential input voltage (DC + peak AC) max.: Max. input voltage per input: Attenuation ratio: Selectable: Bandwidth: Rise time: Input impedance: Output impedance: Max. output Voltage: Max.
PAGE 4
HZO40 Differential Probe 10:1 Technical specifications at 23 °C ±2 °C Bandwidth: Attenuation ratio: Rise time (10…90 %): Gain accuracy: Max. Input Voltage per Input: Max. Differential Input Voltage (DC + peak AC): Max. Common Mode Input Voltage: Input impedance Between Inputs: Each Input to Ground: Output Voltage (into 50 Ω): Offset (typical): CMRR (typical): Battery operation: Battery life (typical): Input for an external power supply: HZO41 Differential Probe 10:1 ±20 V ±60 V 1 MΩ II 3.