Programmable Power Supplies 188 W | 384 W R&S®HMP Series
R&S®HMP Series The R&S®HMP Series Key facts ❙❙ Low residual ripple due to linear post-regulators ❙❙ Real-time voltage, current and watt values ❙❙ High setting and read-back resolution: 1 mV and 0.1 / 0.2 / 1.
R&S®HMP Series 2, 3 or 4 Channels The four power supply units R&S®HMP2020, R&S®HMP2030, R&S®HMP4030 and R&S®HMP4040 offer you the choice between 2, 3 and 4 channels with a total operating performance of 188 or 384 watt. Depending on the model, you have up to 80 or 160 watt available per channel. In addition to the 80 watt channel the R&S®HMP2020 model also offers you a 160 watt channel.
Functions Easy to operate. Easy to explain. Aside from electricity our power supply units in the R&S®HMP series provide many useful functions for practical use. For example, the output power is displayed in real time and a safety shutdown is available for any combination of channels. 2, 3 and 4 channels EasyArb Depending on the application and your needs you can select our power supply units with 2, 3, or 4 channels.
Functions Industrial production environment Power supply units in industrial production environments are often found in 19” racks. The R&S®HMP series instruments are very suitable for this use as all models can be integrated into 19” racks with the rack mounting kits R&S®HZ42 (for R&S®HMP20x0 instruments) and R&S®HZP91 (for R&S®HMP40x0 instruments). Additionally, all front panel connectors, including SENSE lines, are also located at the back panel of the instrument.
Accessories Recommended Accessories R&S®HO732 R&S®HO740 Ethernet/USB dual interface card Interface IEEE-488 (GPIB), galvanically isolated R&S®HZ42 R&S®HZP91 2 RU 19” rackmount kit 4 RU 19” rackmount kit 6 Rohde & Schwarz R&S®HMP Series R&S®HZ72 IEEE-488 (GPIB), cable 2 m
Technical Data Programmable power supplies 2 / 3 / 4 channels R&S®HMP2020 / R&S®HMP2030 R&S®HMP4030 / R&S®HMP4040 5A Voltage Advanced parallel and series operation: simultaneous switching on/off of active channels via “output” button, common voltage- and current control using tracking mode (individual channel linking), individual mapping of channels which shall be affected by FuseLink overcurrent protection (switchoff), all channels galvanically isolated from each other and the protective earth 4 x 0…32
© 2016 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. PD 3607.2978.32 V 02.
