R&S®HMP Power Supply Family Up to four channels in a single instrument Product Brochure | Version 01.01 year HMP_bro_en_5215-4981-12_v0101.indd 1 08.01.
R&S®HMP Power Supply Family At a glance The channel keys light up in different colors to indicate the operating conditions of the channels. All channels can be simultaneously switched on or off with the “Output” key, which lights up white when it is "on". Active outputs light up green in constant voltage mode and red in constant current mode. The R&S®HMP power supplies offer a variety of protection functions to prevent damage to the instrument and the DUT.
R&S®HMP Power Supply Family Benefits and key features More than meets your daily needs ❙❙ All channels galvanically isolated and floating ❙❙ All channels have the same voltage range ❙❙ All channels have overload and short-circuit protection ❙❙ Parallel and serial operation ❙❙ Constant voltage and constant current modes ❙❙ Tracking and link functions ❙❙ Protection functions to safeguard instrument and DUT ❙❙ Modern instrument concept: small, compact and quiet Easy operation ❙❙ Intuitive to use ❙❙ Color cod
More than meets your daily needs All channels have overload and short-circuit protection Even the most experienced user is occasionally distracted – so it’s good to know that since the outputs are protected against overloads and short circuits, the R&S®HMP power supplies will not be damaged. Parallel and serial operation All channels galvanically isolated and floating The R&S®HMP power supply family consists of instruments with two, three or four channels.
cleared. If a configured current level is exceeded, the affected output channel will be automatically switched off and a message will be displayed. Parallel and serial operation Parallel operation – max. 40 A Serial operation – max. 128 V The output channels can be configured in parallel to achieve higher output current, or in series for higher output voltage. The electronic fuse can be linked to other channels (FuseLink function).
Easy operation Intuitive to use All basic R&S®HMP power supply functions can be operated directly via keys on the front panel. It is only necessary to use the menu level for special functions that are needed less frequently. Simply press the “Voltage” key, select an output channel and use the rotary knob or arrow keys to adjust the output voltage in steps as small as 1 mV. You can similarly set a constant output current with a resolution as fine as 0.1 mA, depending on the model and the current range.
Ideal for labs and test systems Tailored for use in labs and system racks Remote control of instrument functions All instruments in the R&S®HMP family can be remotely controlled for use in test systems. The Standard Commands for Programmable Instruments (SCPI) scripting language is used. The following interfaces are available: Dual interface USB/LAN: The R&S®HO732 dual interface with ports for USB and LAN is installed as standard.
Specifications All data is valid at 23 °C (–3 °C/+7 °C) after 30 minutes warm-up time.
Output measurements Temperature coefficient (per °C) Voltage Current Sense function Maximum sense compensation 5 °C to 20 °C and 30 °C to 40 °C ±(% of output + offset) ±(% of output + offset) 0.01 % + 2 mV 0.02 % + 3 mA yes, for each channel 1V Ratings Maximum voltage to earth Maximum counter-voltage Maximum reverse voltage Maximum reverse current voltage with same polarity connected to the outputs voltage with opposite polarity connected to the outputs for 5 minutes max. 150 V (peak) 33 V 0.
General data Environmental conditions Temperature Humidity Power rating Mains nominal voltage Mains frequency Maximum power consumption Mains fuses (115 V power source) Mains fuses (230 V power source) Product conformity Electromagnetic compatibility Electrical safety Mechanical resistance Vibration operating temperature range storage temperature range noncondensing +5 °C to +40 °C –20 °C to +70 °C 5 % to 80 % R&S®HMP2020/HMP2030 R&S®HMP4030/HMP4040 R&S®HMP2020/HMP2030 R&S®HMP4030/HMP4040 R&S®HMP2020/H
Ordering information Designation Base unit Two-Channel Power Supply Three-Channel Power Supply Three-Channel Power Supply Four-Channel Power Supply Included accessories Set of power cables, quick start guide Interface options Dual Interface (RS-232/USB) IEEE488 (GPIB) Interface System components 19" Rack Adapter, 2 HU for R&S®HMP2020/HMP2030 19" Rack Adapter, 4 HU for R&S®HMP4030/HMP4040 Type Order No. R&S®HMP2020 R&S®HMP2030 R&S®HMP4030 R&S®HMP4040 3629.6718.02 3629.6718.03 3629.6776.03 3629.6776.
Service that adds value ❙ ❙ ❙ ❙ ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing.