Instructions

Remote Control Commands
R&S
®
HMP Series
78User Manual 1178.6833.02 ─ 02
ARBitrary:SAVE <Memory>
Saves the arbitrary waveform data in the internal memory. You can save up to three
waveforms in the internal memory.
Parameters:
<Memory> 1 | 2 | 3
Example: See Example "Configuring an arbitrary sequence" on page 76.
Usage: Setting only
Manual operation: See "Save Waveform" on page 43
ARBitrary:START
<Channel>
Starts the arbitrary sequence in the selected channel.
Parameters:
<Channel> 1 | 2 | 3 | 4
Example: See Example "Configuring an arbitrary sequence" on page 76.
Usage: Setting only
Manual operation: See "Start Waveform" on page 42
ARBitrary:STOP <Channel>
Stops the arbitrary sequence in the selected channel.
Parameters:
<Channel> 1 | 2 | 3 | 4
Example: See Example "Configuring an arbitrary sequence" on page 76.
Usage: Setting only
Manual operation: See "Stop Waveform" on page 42
ARBitrary:TRANsfer <Channel>
Transfers the defined arbitrary points to the selected channel.
Parameters:
<Channel> 1 | 2 | 3 | 4
Example: See Example "Configuring an arbitrary sequence" on page 76.
Usage: Setting only
Manual operation: See "Transfer Waveform" on page 42
Arbitrary Setting Commands