User Manual

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Normal Conditions
6076.0822.12.02 – 2.15 –
q 6(/(&7 Key (Front Panel)
By using the SELECT key one of the AF sources for the loudspeaker can be selected that
have been configured in Menu 575 (FRONTPANEL AUDIO SOURCE), e.g. CL1 (Com-
line) or Guard U/V. A Comline is a functional unit of radio modules.
When CL1 is selected as AF source and communication mode V/D UNCP is active, the
guard receiver AF signal can be output at the loudspeaker in addition to the main receiver
AF signal, depending on the GUARD configuration (see Menu 110, page 1 (MANUAL
FIX.FRQ) and Menu 210, page 1(MANUAL PRESET FIX.FRQ)).
After power-on, Comline 1 is selected by default. This is indicated by illumination of
LED 1.
The following table shows how LEDs 1 and 2 are related and which AF signal is output
by the loudspeaker:
q /2&$/ Key (Front Panel)
1RWH
8VLQJWKLVNH\RQO\PDNHVVHQVHZLWK065 7UDQVFHLYHU; $
Activate local mode.
LED LOCAL lights up.
In the menu title area an ’L’ comes up.
The transceiver is controlled exclusively via Control Unit GB 4000C, mod. 02. In local
mode the same functions are available as in remote mode, although here only commu-
nication mode V/D UNCP makes sense.
LED AF signal
12
no AF signal
OLJKWHG
AF signal of main receiver and in addition of guard receiver, if
switched on via softkey GUARD in Menu 110 (MANUAL
FIX.FRQ) or 210 (USER PRESET FIX.FRQ).
IODVKLQJ
AF signal of guard receiver (VHF band)
IODVKLQJ
AF signal of guard receiver (UHF band)
IODVKLQJ IODVKLQJ
AF signal of guard receiver (VHF and UHF bands)
LED 1 lighted
1. Press key LED 1 and 2 flashing
2. Press key none of the LEDs lighted
3. Press key LED 1 lighted


