Operating instructions

CALCulate:MARKer Subsystem R&S ESCI
1166.6004.12 6.58 E-1
CALCulate<1|2>:MARKer<1...4>:FUNCtion:ADEMod:THD:RESult<1...3>?
This command queries the result of the THD measurement. The numeric suffix (:RESult<1...3>)
marks the selected trace 1 to 3.
Example: "ADEM ON" 'Switches on FM demodulator
"CALC:FEED 'XTIM:FM:AFSP" 'Switches on AF spectrum of FM
"DISP:TRAC ON" 'and trace
"CALC:MARK:FUNC:ADEM:THD:RES?" 'Queries THD result
Characteristics: *RST value: -
SCPI: device-specific
Mode:FM
This command is a query only and thus has no *RST value.
This command is only available with option R&S FS-K7 (FM demodulator).
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:ADEMod:CARRier[:RESult<1 to 3>]?
This command queries the carrier power.
With result display FM and SPECTRUM, the carrier power is determined from the current trace data
(CLR/WRITE trace).
With result display RF Power, the carrier power is determined from trace 1 to 3 indicated in the
numeric suffix.
Example: "ADEM ON" 'Switches on FM demodulator
"CALC:FEED 'XTIM:RFP" 'Switches on result display RF POWER
"CALC:MARK:FUNC:ADEM:CARR?" 'Queries the carrier power
Characteristics: *RST value: -
SCPI: device-specific
Mode:FM
This command is only a query and therefore has no *RST value. It is only available with option R&S
FS-K7 (FM demodulator).