Operating instructions

R&S ESCI CALCulate:MARKer Subsystem
1166.6004.12 6.63 E-1
"CALC2:MARK:FUNC:POW:RES:PHZ ON" 'Output of results referred to the channel
'bandwidth.
"CALC2:MARK:FUNC:POW:RES? ACP" 'Queries the result of the adjacent channel
'power measurement in screen B referred
'to the channel bandwidth.
If only the channel power is to be measured, all commands for defining the bandwidths of adjacent
channels as well as the channel spacings are not necessary. The number of adjacent channels is set
to 0 with SENS2:POW:ACH:ACP 0.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:POWer[:STATe] OFF
This command switches off the power measurement in the selected measurement window.
Example: "CALC:MARK:FUNC:POW OFF"'Switches off the power measurement in screen B.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F
This command is an event and therefore has no *RST value.
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:POWer:PRESet
NADC | TETRA | PDC | PHS | CDPD | FWCDma | RWCDma | F8CDma | R8CDma | F19Cdma |
R19Cdma | FW3Gppcdma | RW3Gppcdma | D2CDma | S2CDma | M2CDma | FIS95A | RIS95A |
FIS95C0 | RIS95C0 | FJ008 | RJ008 | FIS95C1 | RIS95C1 | TCDMa | NONE
This command selects the power measurement setting for a standard in the indicated measurement
window and previously switches on the corresponding measurement, if required. The function is
independent of the marker selection, i.e. the numeric suffix <1 to 4> of MARKer is irrelevant.
The configuration for a standard comprises of the parameters weighting filter, channel bandwidth and
spacing, resolution and video bandwidth, as well as detector and sweep time.
Meaning of the CDMA standard abbreviations:
FIS95A, F8CDma CDMA IS95A forward RIS95A, R8CDmaCDMA IS95A reverse
FJ008, F19CDma CDMA J-STD008 forward RJ008, R19CDmaCDMA J-STD008 reverse
FIS95C0 CDMA IS95C Class 0 forward RIS95C0 CDMA IS95C Class 0 reverse
FIS95C1 CDMA IS95C Class 1 forward RIS95C1 CDMA IS95C Class 1 reverse
FWCDma W-CDMA 4.096 MHz forward RWCDma W-CDMA 4.096 MHz reverse
FW3Gppcdma W-CDMA 3.84 MHz forward RW3Gppcdma W-CDMA 3.84 MHz reverse
D2CDma CDMA 2000 direct sequence S2CDma CDMA 2000 MC1 multi carrier
with 1 carrier
M2CDma CDMA 2000 MC3 multi carrier TCDMa TD-SCDMA
with 3 carriers
Notes: The settings for standards IS95A and C differ as far as the calculation method of channel
spacings is concerned. For IS95A and J-STD008 the spacing is calculated from the center
of the main channel to the center of the corresponding adjacent channel, for IS95C from
the center of the main channel to the nearest border of the adjacent channel.
Example: "CALC2:MARK:FUNC:POW:PRES NADC" 'Selects the standard setting for
'NADC in screen B
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F