Operating instructions

CALCulate:UNIT Subsystem R&S ESCI
1166.6004.12 6.84 E-1
CALCulate:UNIT Subsystem
The CALCulate:Unit subsystem defines the units for power measurement settings.
COMMAND PARAMETERS UNIT COMMENT
CALCulate<1|2>
:UNIT
:POWer
DDBM | V | A | W
DBPW | WATT |
DBUV | DBMV | VOLT |
DBPT | DBUA | AMPere |
DBUV_M | DBMV_M
CALCulate<1|2>:UNIT:POWer DBM | V | A | W | DBPW | WATT | DBUV | DBMV | VOLT | DBUA |
AMPere| DBPT| DBUV_M | DBUA_M
This command selects the unit for power in the selected measurement window.
Example: "CALC:UNIT:POW DBM" 'Sets the power unit for screen A to dBm.
Characteristics: *RST value: dBm
SCPI: device-specific
Mode: R, A
In receiver mode, the units DBM, DBUV, DBUA, DBPW, DBT, DBUV_MHZ, DBMV_MHZ and
DBUA_MHZ are available