Operating instructions

R&S ESCI DISPlay Subsystem
1166.6004.12 6.99 E-1
:DISPlay:BARGraph:LEVel:UPPer?
This command queries the maximum level of the bargraph.
Example: ":DISP:BARG:LEV:UPP?"
Characteristics: *RST value: --
SCPI: device-specific
Mode: R
:DISPlay:BARGraph:PHOLd ON | OFF
This command switches on the numeric indication of the maximum value of the bargraph.
Example: ":DISP:BARG:PHOL ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: R
:DISPlay:BARGraph:PHOLd:PRESet
This command resets the maxhold value of the numeric indication of the bargraph measurement.
Example: ":DISP:BARG:PHOL:RES"
Characteristics: *RST value: --
SCPI: device-specific
Mode: R
This command is an event and thus has no *RST value and no query.