Operating instructions

HCOPy Subsystem R&S ESCI
1166.6004.12 6.102 E-1
HCOPy:CMAP<1 to 33>:HSL <hue>,<sat>,<lum>
This command defines the color table in USER DEFINED COLORS mode.
To each numeric suffix of CMAP is assigned one or several picture elements which can be modified
by varying the corresponding color setting. The following assignment applies:
CMAP1 Background
CMAP2 Grid
CMAP3 Function field + status field + data entry text
CMAP4 Function field LED on
CMAP5 Function field LED warn
CMAP6 Enhancement label text
CMAP7 Status field background
CMAP8 Trace 1
CMAP9 Trace 2
CMAP10 Trace 3
CMAP11 Marker
CMAP12 Lines
CMAP13 Measurement status + Limit check pass
CMAP14 Limit check fail
CMAP15 Table + softkey background
CMAP16 Table + softkey text
CMAP17 Table selected field text
CMAP18 Table selected field background
CMAP19 Table + data entry field opaque titlebar
CMAP20 Data entry field opaque text
CMAP21 Data entry field opaque background
CMAP22 3D shade bright part
CMAP23 3D shade dark part
CMAP24 Softkey state on
CMAP25 Softkey state data entry
CMAP26 Logo
CMAP27 Bargraph PK+
CMAP28 Bargraph PK-
CMAP29 Bargraph QPK
CMAP30 Bargraph AVER
CMAP31 Bargraph RMS
CMAP32 Final Meas
CMAP33 Bargraph CAV
Parameter: hue = tint
sat = saturation
lum = brightness
The value range is 0 to 1 for all parameters
Example: "HCOP:CMAP2:HSL 0.3,0.8,1.0"'changes the grid color
Characteristics: *RST value: --
SCPI: conforming
Modes: all
The values set are not changed by *RST.