Operating instructions

R&S ESCI HCOPy Subsystem
1166.6004.12 6.103 E-1
HCOPy:CMAP<1 to 33>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan
| LRED | LMAGenta
This command defines the color table in USER DEFINED COLORS using predefined color values. To
each numeric suffix of CMAP is assigned one or several picture elements which can be modified by
varying the corresponding color setting. The same assignment as for :HCPOy:CMAP<1 to 26>:HSL
applies
Example: "HCOP:CMAP2:PDEF GRE"
Characteristics: *RST value: --
SCPI: conforming
Modes: all
The values set are not changed by *RST.
HCOPy:DESTination<1|2> <string>
This command selects the printer output medium (Disk, Printer or Clipboard) associated with
configuration 1 or 2.
Note: The type of instrument is selected with SYSTem:COMMunicate:PRINter:SELect,
which will automatically select a default output medium. Therefore the command
HCOPy:DESTination should always be sent after setting the device type.
Parameter: <string>::= ’MMEM’ |
’SYST:COMM:PRIN’ |
’SYST:COMM:CLIP’
'MMEM' 'Directs the hardcopy to a file. Command MMEM:NAME
'<file_name> defines the file name. All formats can be
'selected for HCOPy:DEVice:LANGuage.
’SYST:COMM:PRIN’ 'Directs the hardcopy to the printer. The printer is
'selected with command
'SYSTEM:COMMunicate:PRINter:SELect.
'GDI should be selected for
'HCOPy:DEVice:LANGuage.
’SYST:COMM:CLIP’ 'Directs the hardcopy to the clipboard. EWMF should be
'selected for HCOPy:DEVice:LANGuage.
Example: "SYST:COMM:PRIN:SEL2 ‘LASER on LPT1’" 'Selects the printer and output
'medium for device 2
"HCOP:DEST2 'SYST:COMM:PRIN'" 'Selects the printer interface
'as device 2.
Characteristics: *RST value: -
SCPI: conforming
Mode: all
This command is an event and therefore has no *RST value and no query.
HCOPy:DEVice:COLor ON|OFF
This command selects between color and monochrome hardcopy of the screen.
Example: "HCOP:DEV:COL ON"
Characteristics: *RST value: OFF
SCPI: conforming
Mode: all